pin composite Insulator

 Introduction

As the name suggests, the composite pin insulator is mounted on a pin on the cross-arm on the pole. There is a groove on the upper end of the insulator.

This production is applied to high voltage power line service. And have features of good gydrophobicity, anti-ageing, anti-leakage trace and electric erode proof, tensile strength, strong mechanical strength, shock resistence good quakeproof and brittle failure proof, light weight easy to installation, and the installation outline of top and base are the same size with porcelain pin type, they can exchange to use each other. 

System Voltage: 11KV, 33KV, 66KV(69KV), 132KV, 230KV, 400KV, 500KV,800KV 

Material:  Composite polymer/ silicon rubber

Color:  Red, Brown, Gray, or Customer's requirement.

Application: High Voltage Power Transmission

Connection Method: Trough Type

Structure: Pin Insulator

Type: B Type Insulator

International Standard:  IEC, ANSI, or Customer requirement.

 Technical Index

Composite Pin Insulator
Rated bent withstand load(kN)	Structure  height  (mm)	Structure height(mm)	umbrella diameter (mm)	The min distance (mm)	Min nominal creepage distance (mm)	The bottom thread diameter	The Rated Voltage (kV)	The High Voltage (kV)	Lighting full wave impulse sithstand voltage in not less than
FPW-10/2T16	2	240	140/105	110	300	16	10	12	90
FPQ1W-10/4T20	4	183	140/105	127	300	20	10	12	90
FPQ2W-10/3T20	3	260	146/112	184	460	20	10	12	110
FPS-105/5	5	250	90	173	380	20	10	12	105